Operating instructions

TF23-01 is a high-performance intelligent lock control system produced by Hooson。

Product parameters:

Number of administrators ：5 sets of fingerprints+5 sets of passwords

Number of regular users：25 sets of fingerprints+50 sets of passwords

+ 50 sets of smart cards

Card Type ：13.56MHZ 14443 type A

Antistatic ability：Contact discharge ± 8kV, air discharge ± 15kV operation temperature：-20°C---+60°C

storage temperature：-40°C---+85°C Number of password digits：6-10 digits working voltage：4.5V--6V

Sleeping current：＜100uA Working average current：＜150mA WeChat mini program: supported

Register as the first administrator:

The first administrator must be a password.

Registration administrator：

5 administrator fingerprints can be registered, and 5 sets of administrator passwords can be registered.

Register as a regular user:

Ordinary users can register 25 fingerprints, 50 sets of passwords, 50 cards, and 50 faces。

Delete user：

Deleting users can only delete regular users, and administrators cannot be deleted.

Restoring the factory settings will delete all administrators and ordinary users, and the smart lock will be in on mode. Please choose carefully.

Set system time：

Please set the system time in advance (the time should be consistent with the phone time), otherwise it may cause the WeChat mini program to not function properly.

WeChat mini program set：

Please set the system time in advance when using the WeChat mini program (the time should be consistent with the phone time).

Open WeChat to scan the QR code (as shown in the figure below) or search for the WeChat mini program:” 云智锁服务”, click the + icon to add a lock, enter the lock name to generate an 8-digit pairing code, and once pairing is successful, you can use it.

QR code

Operate the door lock end according to the following diagram：

WeChat mini Program Usage：

Temporary password usage for WeChat mini programs：

Click on the top right corner to generate a key, select a three minute valid password, and generate a password.

The temporary password is a valid password for three minutes. Please use it within three minutes. If it expires, please regenerate it.

WeChat mini program timed password usage：

Click on the top right corner to generate the key, select a long-term valid password, set the time, and generate the password.

Timed password is a custom password with a valid time.

2023-12-2T i 12:00:00

8 6 ) 6 5 5 5 6 9

Door opening record query：

Verification Mode Settings：

Force factory reset：

Menu Restore Factory Settings:

Instructions for using shortcut keys： Version information：

Anti prying alarm on and off:

System Mute Set：

Normally open setting：